Home » Blog » DLC Releases Technical Requirements V4.2

DLC Releases Technical Requirements V4.2

DLC Releases Technical Requirements V4.2 – DesignLights Consortium

DLC Releases Technical Requirements V4.2

The DLC® is pleased to release Technical Requirements V4.2, which includes new expansions and revisions to the Technical Requirements for solid-state lighting (SSL) products.

These new requirements will be discussed during an informational webinar held on Tuesday, May 2, 2017 at 3:00PM ET. This webinar will be repeated on Wednesday, May 3, 2017 at 2PM ET.

Please register for the May 2 webinar here: https://attendee.gotowebinar.com/register/759066926245786625
Please register for the May 3 webinar here: https://attendee.gotowebinar.com/register/7912706180347137281

Additional information and clarification is available in the Transition Guidance document linked at the bottom of this page.

Technical Requirements V4.2 is the finalization of several months of discussions with DLC Members and stakeholders, and includes the following expansions and revisions: new testing requirements for products under Specialty Use designations with the word “Hazardous” in the designation descriptor; a revision to the Linear Replacement Lamp policy to create new, distinct General Applications for T5 and T5HO Four-Foot Replacement Lamps; and allowances to the efficacy requirements for products that have low CCT or high CRI.

  • New Testing and Reporting Requirements for Hazardous Location Lighting
    Under the V4.2 requirements, products applying to a Specialty Use designation with a Hazardous descriptor must undergo testing and certification to UL 844 by a relevant safety organization.
  • Linear Replacement Lamps
    Under the V4.2 requirements, Four-foot Linear Replacement Lamps are broken into three General Application designations, with distinct eligibility, testing, and performance requirements.

    • T8 Replacement Lamps: LED lamps that are 48 inches long and employ a G13 base
    • T5 Replacement Lamps: LED lamps that are 46 inches long, employ a G5 base, and are intended to replace T5 fluorescent lamps. Fixture level tests
    • T5HO Replacement lamps: LED lamps that are 46 inches long, employ a G5 base, and are intended to replace T5HO lamps
  • Allowances
    The concept of Allowances was first introduced with the release of Technical Requirements V4.0. Following review and deliberation of submissions received from manufacturers in response to a request for proposals on Allowances needs, the DLC is pleased to launch the Allowances program with allowances of up to 5% to the efficacy requirement  for products that have low CCT or high CRI. Please note: V4.2 Allowances for CCT and CRI will be retroactively applied to all products on the QPL prior to 4/1/2017 (that is prior to the V4.0 de-listing).
  • Correction to Multiple LED Policy
    Technical Requirements V4.2 includes a correction the Multilpe LED policy, which previously was restricted to products employing multiple white-light LEDs only. This restriction is now removed.

 

Implementation Timeline

The implementation timeline of Technical Requirements V4.2 only affects manufacturers of linear replacement lamps and hazardous location luminaires listed under Specialty Use designations that are affected by this revision:

  • Manufacturers may submit applications that comply with these policy changes immediately.
  • A submission grace period is in effect until May 19, 2017. During this grace period, manufacturers may submit listings to the DLC QPL under the V4.1 requirements.
  • A listing grace period is in effect until July 28. Following this grace period, all products must meet the V4.2 requirements to remain listed.

Technical Requirements V4.2-Changes Highlighted

Technical Requirements V4.2-Transition Guidance

Comments are closed.